Skip to main content

19 The POLARBEAR telescope

Keywords

POLARBEAR, Ground-based observation, Half-wave plate, Detectors and readout, Beam

19 The POLARBEAR telescope

POLARBEAR Huan Tran Telescope at the James Ax Observatory located at Cerro Toco in the Atacama Desert in Northern Chile
Figure 19.1: POLARBEAR Huan Tran Telescope at the James Ax Observatory located at Cerro Toco in the Atacama Desert in Northern Chile1
Cross section of POLARBEAR (left) and detail of the area around the prime focus (right).
Figure 19.2: Cross section of POLARBEAR (left) and detail of the area around the prime focus (right).2

POLARBEAR is a CMB experiment installed on the \({2.5\,\mathrm{m}}\) aperture Huan Tran Telescope as shown in fig. 19.1, located at the James Ax Observatory in the Atacama Desert in Chile3 (see fig. 9.2 and sec. 9.1), with a \({3.5'}\) beam. As shown in fig. 19.2, it has an off-axis Gregorian design with the advantage of a clear aperture.4 It packs 1274 transition edge sensor (TES) bolometers observing at \({150\,\mathrm{GHz}}\).

Detectors are cooled to \({250\,m\mathrm{K}}\), whereas the lenses are at \({4\,\mathrm{K}}\). It achieves \(\text{NET}_\text{array} = {23\,\text{µ}\mathrm{K}\,\sqrt{\mathrm{s}}}\).

POLARBEAR has 5 seasons of observations. In the 1st–2nd seasons (2012–2014), it observed 3 different patches on the sky with a total of \({25{^\circ}^{2}}\) sky coverage. It achieved a sensitivity of \({8.3\,\text{µ}\mathrm{K}\,'}\) in one of the patches named RA23. A B-mode spectrum was constrained at \(500 \leq \ell \leq 2100\), where the 1st season of data provided the first direct evidence of polarization lensing.5

After the 2nd season, a Continuously Rotating Half-Wave Plate (CRHWP) was installed to modulate the polarization signal so that the \(1/f\) noise was reduced to target large scale, low-\(\ell\) signal. Optimally, it should be placed as far skyward as possible to avoid I-to-P leakage caused by the asymmetry in the optical system. But the limitation of HWP technology had put its maximum size to about \({0.5\,\mathrm{m}}\) in diameter. Due to this constraint, the optimal point to place it is between the primary and secondary mirrors6 as shown in fig. 19.2.

POLARBEAR sky coverage
Figure 19.3: POLARBEAR sky coverage

In the remaining 3rd–5th seasons (2014–2017), it observed a sky area of \({670{^\circ}^{2}}\), as shown in fig. 19.3. The presence of the CRHWP and the larger sky area enables us to target low-\(\ell\) science. The resultant observed \(\ell\)-range is \(50 \leq \ell \leq 3000\). We called this informally the “large-patch”. This unique design of a medium aperture telescope with a CRHWP enables us to target both low-\(\ell\) for primordial B-mode and high-\(\ell\) for lensing B-mode. It achieves a sensitivity of \({32\,\text{µ}\mathrm{K}\,'}\).